Attention!! Postpone of the arduino training!

Attention!!

We have to postpone the training to 23 & 24 August 2014 because of some difficulties..

Sorry for any inconvenience. For participant who have register, we will contact you personally.

Thank you.

Method of Payment for Arduino Training in Indera Sempurna Resort, Kuantan

The payment for Arduino Training in Indera Sempurna Resort, Kuantan can be made via Bank Transfer/ Local Order (LO) to:

Bank: AMBANK 

Account No: 0052012001517

Name: SMART PACIFICHOLDING SDN BHD

Please email to falfazli@gmail.com the details after the payment.

We welcome you to our arduino training!!

What you will learn in Arduino for Beginners training?

There are 14 chapters u will learn!!

Chapter 1: How to use button to control LED
Chapter 2: How to control six LEDs by digital output pins
Chapter 3: How to use various of LEDs to create car traffic light and pedestrian traffic light
Chapter 4: How to use potentiometer to control the LED on PWM pin
Chapter 5: How to use photocell to control the blinking rate of an LED
Chapter 6: Test servo motor
Chapter 7: How to use potentiometer to control the servo motor
Chapter 8: How to use tilt switch to control an LED
Chapter 9: How to use NPN transistors to create touch switch
Chapter 10: How to use thermistor to control blink of an LED
Chapter 11: How to make an old school buzzer game
Chapter 12: How to use potentiometer to control RGB
Chapter 13: How to use relay to switch two LED
Chapter 14: How to use Serial 1602 LCD

After that you can start your own DIY projects!!

Example of projects

2 DAYS TRAINING ON ARDUINO FOR BEGINNERS

‘2 DAYS TRAINING ON ARDUINO FOR BEGINNERS’

24 & 25 Mei 2014 di Indera Sempurna Resort, Kuantan

Untuk maklumat lanjut / Pendaftaran: Call En Falfazli at 012-2473441 or En Zaidi at 019-7788872 or email falfazli@gmail.com

Pengenalan

Kursus ini bertujuan memberi pendedahan kepada peserta tentang penggunaan Arduino sebagai sistem kawalan untuk projek-projek elektronik.

Objektif Kursus

Daripada kursus ini, kami menjamin peserta dapat:

·     Memahami fungsi analog input, analog output, digital input dan digital output di Arduino

·     Mengetahui cara menggunakan sensor analog dan digital

·     Membuat projek sistem kawalan suapbalik atau sistem automasi

·     Menggunakan LCD sebagai perantara

Kandungan Kursus

Tajuk 1: Mengawal LED dengan menggunakan suis butang

Tajuk 2: Mengawal 6 LED dengan pin digital output

Tajuk 3: Menggunakan LED untuk membina sistem lampu trafik dan lampu pejalan kaki

Tajuk 4: Menggunakan perintang boleh laras untuk mengawal LED pada pin PWM

Tajuk 5: Menggunakan photocell untuk mengawal kelajuan kerlipan LED

Tajuk 6: Menggunakan servo motor

Tajuk 7: Menggunakan perintang boleh laras untuk mengawal kelajuan servo motor

Tajuk 8: Menggunakan suis tilt untuk mengawal  LED

Tajuk 9: Menggunakan NPN transistors untuk membina suis sentuh

Tajuk 10: Menggunakan thermistor untuk mengawal kerlipan LED

Tajuk 11: Bagaimana membina old school buzzer game

Tajuk 12: Menggunakan perintang boleh laras untuk mengawal RGB

Tajuk 13: Menggunakan relay untuk mengawal 2 LED

Tajuk 14: Bagaimana menggunakan Serial 1602 LCD

Siapa yang patut hadir?

Kursus ini sesuai untuk semua tanpa mengira bidang asalkan peserta mempunyai minat untuk membuat projek sendiri. Peserta kursus akan dibekalkan dengan Arduino KITs berharga RM150 yang mengandungi:

•   1x Arduino Uno Development Board

•   1x 1602 Serial LCD

•   1x USB Cable

•   1x Breadboard

•   1x Hookup Wire Set

•   8x Resistor - 220Ω

•   4x Resistor - 1kΩ

•   4x Resistor - 10kΩ

•   4x Resistor - 100kΩ

•   1x Resistor - 1MΩ

•   1x Resistor - 5.1MΩ

•   2x NPN Transistor

•   1x FET Power Transistor

•   2x Diode (Rectifier)

•   1x Diode (Zener)

•   1x Motion Sensor (Tilt Switch)

•   1x Light Sensor (Photocell)

•   1x Temperature Sensor

•   2x Button

•   1x Rotary Knob (Potentiometer)

•   1x Servo Motor

•   1x RGB LED

•   2x Green LED

•   2x Red LED

•   2x Yellow LED

•   1x Piezo Buzzer/Speaker

•   1x Relay

•   1x Project Box

Yuran

Normal Registration	Early Registration	Group Registration (3 person)
RM 900	RM 800 (Pay before 20/4/14)	RM 800/person

Tempat tinggal tidak disediakan.

Sarapan, Makan tengahari dan minum petang disediakan.

Sila mendaftar awal kerana kursus ini terhad kepada 30 orang peserta sahaja. Tekan di sini untuk mendaftar.

Lawat laman web kami di Arduino for Beginners

Training INFORMATION

Here are details of our Arduino for Beginners training in Indera Sempurna Kuantan for 2 days..

**Expected date: 24 & 25 May 2014
Venue: Indera Sempurna Resort, Kuantan
Fees: 

Normal Registration	Early Registration	Group Registration (3 person)
RM 900	RM 800 (Pay before 20/4/14)	RM 800/person

Accomodation: NOT provided
Meals: Breakfast, Lunch and afternoon tea is included

Details of training please click here

Method of payment please contact us

**subject to changed

Who Should Join Our Training??!!

You have an idea to make ELECTRONICS PROJECT but have LESS KNOWLEDGE  on this field ??? and also NOT FAMILIAR with  ARDUINO….

Don’t worry…We are now offering you an EXCLUSIVE OPPORTUNITY to have HANDS- ON TRAINING regarding ARDUINO. WHATEVER your field...You are army, police, teacher, doctor etc...as long as you interested in DIY, you should join this training and you will realize how easy to use ARDUINO

From this training, we guarantee that the participants:

1. Understand what are analog input, analog output, digital input and digital output on Arduino.

2. Know how to use analog and digital sensor.

3. Know how to make project with closed loop system or automation system.

4. Know how to use LCD as an interface.

Arduino Uno

Arduino For Beginners training will cover the following chapters :

Chapter 1: How to use button to control LED

Chapter 2: How to control six LEDs by digital output pins

Chapter 3: How to use various of LEDs to create car traffic light and pedestrian traffic light

Chapter 4: How to use potentiometer to control the LED on PWM pin

Chapter 5: How to use photocell to control the blinking rate of an LED

Chapter 6: Test servo motor

Chapter 7: How to use potentiometer to control the servo motor

Chapter 8: How to use tilt switch to control an LED

Chapter 9: How to use NPN transistors to create touch switch

Chapter 10: How to use thermistor to control blink of an LED

Chapter 11: How to make an old school buzzer game

Chapter 12: How to use potentiometer to control RGB

Chapter 13: How to use relay to switch two LED

Chapter 14: How to use Serial 1602 LCD

All participants entitled to get a free Arduino for Beginners Kit worth RM150. What are included in this kit?

1. 1x Arduino Uno Development Board
2. 1x 1602 Serial LCD
3. 1x USB Cable
4. 1x Breadboard
5. 1x Hookup Wire Set
6. 8x Resistor - 220Ω
7. 4x Resistor - 1kΩ
8. 4x Resistor - 10kΩ
9. 4x Resistor - 100kΩ
10. 1x Resistor - 1MΩ
11. 1x Resistor - 5.1MΩ
12. 2x NPN Transistor
13. 1x FET Power Transistor
14. 2x Diode (Rectifier)
15. 1x Diode (Zener)
16. 1x Motion Sensor (Tilt Switch)
17. 1x Light Sensor (Photocell)
18. 1x Temperature Sensor
19. 2x Button
20. 1x Rotary Knob (Potentiometer)
21. 1x Servo Motor
22. 1x RGB LED
23. 2x Green LED
24. 2x Red LED
25. 2x Yellow LED
26. 1x Piezo Buzzer/Speaker
27. 1x Relay
28. 1x Project Box

So, reserve yourself because the seats are limited to 30 participants only by click here.

Wait for our training in Indera Sempurna Resort, Kuantan Pahang, Malaysia!!

Hello all!! We will organise "2 Days Training on Arduino for Beginners" on May 2014 (the exact date will be inform later) in Indera Sempurna Resort, Kuantan, Pahang, Malaysia. The training is special for those who want to become familiar with Arduino Platform. The details of the training will be inform later. All participants will be provide with Arduino kit. Stay tuned with us for any updates.

Indera Sempurna Resort

Certificate 2

Add caption

Certificate 1

Who is our trainer?!!

Mr Falfazli handled the arduino training for beginners

Mr Mohd Falfazli Bin Mat Jusof is a Lecturer in Faculty of Electrical & Electronics Engineering Universiti Malaysia Pahang. He was graduated from Ehime University, Japan for Bachelor(2008) and Master Degree (2010). He has wide experiences in Arduino platform for more than 5 years. He has been teaching several subjects including PC interfacing, Engineering Project and Instrumentation & Measurement. Recently he is doing various projects by using Arduino such as:

• Proton Green Mobility Challenge 2012 (2nd Place)
• World Solar Challenge 2013 (Australia)
• Automated Sputum Quality Test (Gold Medal at British Invention Show 2013)
• The Automated Vision for Detection and Quantification of Pus Cells and Epithelial Cells for Sputum Quality Testing (Gold Medal at CITREX 2013)
• Human Tracking Security Camera for Home Surveillance (Silver Medal at CITREX 2014)
• Two wheels balancing vehicle (Segway) (Silver Medal at CITREX 2014)
• Telemetry System
• Car Driver Assisted System
• Intelligent traffic light system
• Unicycle etc

He also has conducted various training for:

- Arduino for Beginners Training in FKEE, UMP 2013
- Arduino: Sparkfun Inventors Kit (SIK) Practical Approached FKM, UMP 2013

The training organised by Mr Falfazli

We hope with the experiences and expertise of Mr Falfazli, the participants will gain much knowledges and skills by using Arduino platform.